Property Appliance Repair: What to Do When Your Ice Maker Is Not Making Any Ice?

Through the hot summer days, the ice maker is our ideal friend in the kitchen. But what if your ice maker abruptly stops producing any ice, what are you to do? Nicely, my friend, you are in luck, for the reason that this report will support you know the purpose why and what are the necessary measures to execute in order to resolve the problem.

So, why is your ice maker not producing any ice?

1. Power connection
Prior to something else, check no matter whether your machine is connected to the energy outlet, if it is, verify if the power outlet is functioning well and is transmitting electric present. Then turn on your ice maker to verify if it is okay or not. The wire along the suitable side of the machine must be lowered as far as it goes. If this is in a raised position, your machine is off and it will not make any ice.

2. Right freezer temperature
If the icemaker wire is positioned appropriately and is turned on, proceed to check the freezer temperature. The temperature should be inside the range of to eight degrees Fahrenheit. If it is above 10 to 12 degrees, your machine will not create ice.

For a newly installed icemaker, you will want up to 24 hours to let the machine function and cool down. A newly installed icemaker may perhaps not perform until the ice mold temperature has dropped to about 15F – 16F degrees. If you have just added a water line to the refrigerator, it may take up to about an hour and a half for the machine to begin operating. Also, a newly installed water line might have air in the line. appliance repair Desoto TX can occasionally take a handful of ice producing cycles to clear the line of air.

three. Verify water source
Okay, in order to make ice, you require water. So make positive that there is water flowing to the ice maker. Verify for kinks in the tubing and appear out for frozen particles stuck inside the water tube. Also make confident that the household water supply is turned on. At times the water inlet valve can go terrible. If there is water in the ice maker, but it really is not freezing, use a freezer thermometer to verify that the temperature is cold enough for it to freeze.

4. Verify copper supply

Make positive the copper supply line to the refrigerator is turned on below the sink, or coming from the basement.

Right after checking all the above talked about elements and particular that the freezer is cold enough but it is still not creating any ice, verify and really feel the bottom of the ice maker unit. This spot is normally cold for an ice maker running smoothly. But if it is hot or warm, it is feasible that the little heating element inside is stuck or broken. This heating element when turned on melts the bottom of the cubes so that they can be released and harvested by the ejector blades. In this case, you will have to replace this part in order to make your ice maker perform smoothly again.

Leave a Reply

Your email address will not be published.